Product Description
FEP Teflon Heat Shrink Tubing
Teflon Shrink Tubing , Teflon Heat Shrink Tubing for Hot-stamp And Print-wheel Equipment is made of polyterafluoroethylene propylene(FEP).
High Temperature Teflon Tubing the products generally apply to:
1, Protect and insulate electronic components, resistance and capacitor, and thermocouple from the high temperature oil environments.
2, Provide machinery protection for all kinds of metal wire. For example: protect, insulate and reinforce the end of the wire, wiring, and terminal.
Application:
1, Transparent Teflon Tube , Teflon Cable Shrink Sleeve cover the roller and idler wheel in machinery. ( Office machinery, papermaking machinery, printing and dyeing machinery, printing machinery, etc.)
2, Cover the rolling shaft of conveyor belt ( Non-stick oil )
3, Insulating sheath, insulate the motor rotor, water treatment\oil field and other magma sample preparation industries.
4, Apply to anti-explosion for the fluorescent light tube.
FEP Heat Shrink Tube , Transparent Heat Shrinkable Tube this product is highly electrical insulating, highly flame retardant,self-lubricating and highly resistant to super high temperature, chemical-reagents and almost all oil and other chemicals. LED & Fluorescent Lamp Protection Sleeves it finds extensive-application automotive, war industry and aerospace markets.
Features & Benefits
1, Noninflammability, non-stick, environment protection without pollution, anti-UV
2, Anti chemical corrosion: It`s only resistant to fluorine and alkali metal in high environment and can`t work to all other strong and thin inorganic acid,alkali and ester.
3, Electric insulation: 60HZ-60MHZ dielectric constant is 2.1 in high and low temperature.
4,Volume resistance>1018ΩM , surface resistance > 1013Ω , arc resistance>165 seconds, no electric leakage.
5, Low friction, dynamical friction coefficient: 0.2-0.3.
6, resistance to low and high temperature: -200--200℃
7, Heat shrink ratio: 1.7:1 ,longitudinal shrinkage: ≤8%
|
Product Property
|
Performance requirements
|
Test method
|
Test Date
|
|
Longitudinal shrinkage ratio
|
≤10%
|
ASTM D 2671
|
≤ 8%
|
|
Tensile strength
|
11Mpa min
|
ASTM D 638
|
≥12.4MPa
|
|
Elongation at break
|
200% min
|
ASTM D 638
|
≥300%
|
|
Heat shock 300℃,4hrs
|
No cracking,
dripping or flowing
|
ASTM D 2671
|
Pass
|
|
Elongation after aging
(250℃, 168hrs)
|
200% min
|
ASTM D 638
|
≥250%
|
|
Dielectric voltage withstand
|
2500V., 60sec,
no breakdown
|
ASTM D 2671
|
Pass
|
The max. inner diameter only can be up to 200mm.
Color: transparent.
Pointed dimension is available according to customers' requirements.
.png)
Contact Now
