LED-Fluorescent Lamp Protection Sleeves/PET Explosion-proof tube LED Light Heat Shrink Tube
LED-Fluorescent Lamp Protection Sleeves is made of PET materials, PET Explosion-proof tube LED Light Heat Shrink Tube with superior transparency, good heat dissipationeffect, insulation, protect the glass not to break.
Feature & benefit:
a) White LED-PET heat-shrink tube can homogenize the dot light to area light.
b) The uniform theory of light diffusion heat shrink sleeve is that the light ray will generate many refraction, reflection and scattering when the light go through the different refraction rate medium and get the effect of optical diffusion.
c) Light transmittance can be up to 85-93%, haze 95-99%, customizable.
d) RoHS compliant, no mercury, uvioresistant,save energy and low carbon.
It`s widely applied to T5,T6,T8,T10,T12 LED lights for light diffusion and proofing explosion.
a) Min. Shrink temp.:60 degrees Celsius
b) Final shrink temp.: 125 degrees Celsius
c) Work temp. : -55~125 degrees Celsius
Increase length 5mm at both ends of the glass lamps when cutting the tube, set the glass lamps which have been scrubbed by alcohol and dried on to the cutting heat shrink tube.
Put them into the 75-85℃constant temperature thermal cycling tunnel furnace to shrink.After 1-2 minutes, check if the tube is shrinkable.
If not, let them shrink sequentially. If the temperature is a little high, the heat shrink tube will generate crystal and black patches. Trim them with art knife after they are cold already, go to next step to install if no problem.