Product Description
Dual Wall Heat Shrink Tube and Cable Sleeve
Dual Wall Heat Shrink Tube and Cable Sleeve, Dual Wall Heat Shrink Tubing the outer layer makes by polyolefin PE material which is flame-resistant, semi-hard and wear-resistant. High shrink ratio, good adhesion performance, and the physical &chemical properties are also good. So it can protect the wire harness very well.
Dual Wall Tubing the inner PA hot melt adhesive :High temperature resistance, waterproof, damp-proof, corrosion resistance.
Dual Wall AdhesiveTubing, Waterproof Dual Wall Tubing apply to automobile wire harness, household wire harness, wire and cable branch, metal pipeline where need insulated protection.
Dual Wall Tubes, Polyolefin Dual Wall Tubing is characterized by halogen free, Flame resistant.This kind of Heat Shrink Tube is
environmentally friendly, soft, Insulation, shrink at low temperature. Dual Walled Electrical Heat Shrink Tubing, Voltage level of this heat shrink tube is 600V.
Features & Benefits
1, Semi-hard materials, flame resistance, abrasion resistance, anti-UV.
2, High shrink ratio: 4:1
3, Superior sealing, waterproof, dampproof, corrosion resistance.
Operating Indexes
1, First Shrink Temp.:70 degrees C
2, Final Shrink Temp.:125 degrees C
3, Working Temp.:-45~135 degrees C
Up to standard: Approvals
According with ROHS,135℃, 600V
|
Product Properties
|
Test method
|
Test Date
|
|
Longitudinal shrink ratio
|
UL224
|
≥0~±5%
|
|
Tensile strength
|
ASTM D 2671
|
15MPa
|
|
Elongation at break
|
ASTM D 2671
|
≥400%
|
|
Tensile strength after aging
|
158℃,168hrs
|
≥13MPa
|
|
Elongation after aging
|
≥300%
|
|
Breakdown strength
|
IEC 93
|
≥20KV/mm
|
|
Corrosion
|
ASTM D 2671
|
Pass
|
|
Flammability
|
VW-1
|
Pass
|
|
Volume resistance
|
IEC 60093
|
≥1014Ω.cm(min.)
|
|
Hot melt adhesive technology index
|
|
water absorption
|
110 ± 5℃
|
ASTM E 28
|
|
Softening point
|
< 0.5%
|
ASTM D 570
|
|
peel strength (PE)
|
≥120N/25mm
|
ASTM D 1000
|
|
peel strength (AI)
|
≥80N/25mm
|
ASTM D 1000
|
|
Nominal Size
|
As supplied
(mm)
|
After recovered ( mm )
|
Standard Packing
(M/PCS)
|
|
(mm)
|
(inch)
|
D (min.)
Inside diameter
|
d (min.)
Inside diameter
|
Wall Total thickness
WT
|
t. Adhesivel thickness
|
|
¢ 6.0
|
1/4
|
≥6.0
|
≤1.27
|
1.30 ± 0.20
|
0.80± 0.20
|
1.22
|
|
¢ 8.0
|
5/16
|
≥8.0
|
≤1.65
|
1.50 ± 0.20
|
0.85 ± 0.20
|
1.22
|
|
¢ 12.0
|
1/2
|
≥12.0
|
≤2.41
|
2.00 ± 0.20
|
0.90 ± 0.20
|
1.22
|
|
¢ 18.0
|
3/4
|
≥18.0
|
≤4.45
|
2.50 ± 0.20
|
1.15 ± 0.20
|
1.22
|
Standard color is black, other internatioal size can be customized.
Pointed size can be customized.
.png)
Contact Now
